Micro Sealing on Ferrous, Non-Ferrous Casting, Vacuum Impregnation Process-Micro Porosity Process
Vaccum Impregnation
Porosity Categories
Process
Applications
Technical Specifications
 

The key to high reliability is strict adherence to proven quality control procedures. Our testing processes are a part of our standard production work and include testing to the highest industry standards as required by your specification.

Technical Specifications
3. Product Composition Blend of methacrylate monomer
UNCURED PROPERTIES
Appearance
Colour

Odour / Taste
Viscosity
Density/ Specific gravity
Solubility Description
Fluorescent
Gel time at 90 deg. C.
Pot life

CURED PROPERTIES
Temperature Range
Pressure Resistance

Chemical Resistance


Electrical Resistance
Surface Resistivity at 23 deg. C
73 deg. F and 75% RH to BS 771
Electric Strength BS 771
Dielectric Constant
Co-efficient of Liner Expansion
ASTM D696-79
Sealing Performance

Liquid
Light (or pale ), Straw

Mild ( Faint )
32-34 S Temperature 20deg.C
1.005 – 1.015 Temperature 20deg.C
Forms an Emulsion
Yes------------------
1 – 4 minutes
Indefine under recommended
operating

-50deg. C to 200deg.C
Greater than 12,000 PSI (815 bar )
pressure strength of the Impregnant
is equal to the structural strength of
the parent metal
Include Feon Gases Acids,
Hydraulic Fluids, oils, water, steam,
Alkalis anti freeze and most petrochemical products. Further Information is available on request
Greater than 10 to the power of 14 ohms

Approx. 150 KV centimeters
Approx 3 at 50 Hz – 2.5 at 9

Hz0.000117 per degree Celsius
Excellent

Franchisee of
ULTRASEAL (INDIA) PVT. LTD. PUNE
In Association with Ultraseal International U.K.
Copyright ® 2005 Abhijit Corporation